( 7W Laser Circle Test )
( File created: Wednesday May 12 2021 - 09:18 AM)
$DLDanger! Laser File Detected.
( for Next Wave Automation from Vectric )
( Material Size)
( X= 6.000, Y= 6.000, Z= 0.750)
( Z Origin for Material  = Material Surface)
( XY Origin for Material = Center)
( XY Origin Position  = X:0.000, Y:0.000)
( Home Position)
( X =  X0.0000 Y =  Y0.0000 Z =  Z0.2500)
( Safe Z = 0.200)
()
(Toolpaths used in this file:)
(7W Laser Circle Test)
(Tools used in this file: )
(1 = 7W laser engraver)
(7W laser engraver)
(|---------------------------------------)
(| Toolpath:- '7W Laser Circle Test'    )
(|---------------------------------------)
G90
G20
F100.0
G00  Z0.2500
S0
M3
G04 P1
F100.0
G00 X0.0000 Y0.5000 Z0.2000
G00 X0.0000 Y0.5000 Z0.0000
F100.0
S500
G03 X-0.5000 Y0.0000 I0.0000 J-0.5000
G03 X0.0000 Y-0.5000 I0.5000 J0.0000
G03 X0.5000 Y0.0000 I0.0000 J0.5000
G03 X0.0000 Y0.5000 I-0.5000 J0.0000
S0
F100.0
G00 X0.0000 Y1.0000 Z0.2000
G00 X0.0000 Y1.0000 Z0.0000
F100.0
S500
G02 X1.0000 Y0.0000 I0.0000 J-1.0000
G02 X0.0000 Y-1.0000 I-1.0000 J0.0000
G02 X-1.0000 Y0.0000 I0.0000 J1.0000
G02 X0.0000 Y1.0000 I1.0000 J0.0000
S0
F100.0
G00 X0.0000 Y1.5000 Z0.2000
G00 X0.0000 Y1.5000 Z0.0000
F100.0
S500
G03 X-1.5000 Y0.0000 I0.0000 J-1.5000
G03 X0.0000 Y-1.5000 I1.5000 J0.0000
G03 X1.5000 Y0.0000 I0.0000 J1.5000
G03 X0.0000 Y1.5000 I-1.5000 J0.0000
S0
F100.0
G00 X0.0000 Y2.0000 Z0.2000
G00 X0.0000 Y2.0000 Z0.0000
F100.0
S500
G02 X2.0000 Y0.0000 I0.0000 J-2.0000
G02 X0.0000 Y-2.0000 I-2.0000 J0.0000
G02 X-2.0000 Y0.0000 I0.0000 J2.0000
G02 X0.0000 Y2.0000 I2.0000 J0.0000
S0
G00  Z0.2500
G00  X0.0000  Y0.0000
M02