Support Tim

  • Total activity 211
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 3 users
  • Votes 0
  • Subscriptions 108

Activity overview

Latest activity by Support Tim
  • Support Tim created an article,

    Add your Shark Machine to Vcarve/Aspire.

    In the v11 update of Vcarve (Desktop and Pro) and Aspire software, the Machine Database was introduced. This innovative feature empowers users to establish and save personalized settings and config...

  • Support Tim created an article,

    Ready2Control - Sending and Issue Report

    If something goes wrong while you're using the Ready2Control Software, you should let us know by sending an Issue Report. This report will have computer log files from the current time you used Rea...

  • Support Tim created an article,

    2HP 110V Air-Cooled Spindle Kit

    \ 2HP 110V Air Cooled Spindle Kit - Store Link This Air-cooled spindle is ultra-quiet, made with long-life German-made precision bearings, and designed for harsh environment operations. Operates on...

  • Support Tim created an article,

    4th Axis Driver Installation Guide

    The 4th Axis Driver card enables 4th axis (rotary) functionality to the Shark CNC machines. By installing this motor driver board into the HD Control box, users can unlock the potential for intrica...

  • Support Tim created an article,

    Pen Turning Basics

    Pen turning is a popular woodworking craft that involves creating unique and customized writing instruments. It is a process of crafting pens by turning a blank, usually made of wood or acrylic, on...

  • Support Tim created an article,

    Common Reasons for reduced water/Coolant flow.

    There can be several common reasons for a blockage in a water-cooled spindle motor. Here are a few possibilities: Debris or Foreign Objects: One of the most common reasons for blockages is the pre...

  • Support Tim created an article,

    20W Laser engraving and cut Tests

         Next Wave CNC's 20 Watt Laser is a great accessory that adds another level of customization to your products but determining what feed rate and power value should be used with specific materia...

  • Support Tim created an article,

    Is the CNC Shark configurable? Can I add my own upgrades?

    The configuration of Shark CNC machines is not customizable. Third-party parts, software, components, or peripheral devices are not supported, and any modifications to the hardware or firmware that...

  • Support Tim created an article,

    Do I need internet access to use the Shark CNC machine or Ready2Control?

    To complete the initial registration of the Shark CNC machine and install the Next Wave Software, an internet connection is necessary. However, once the registration and installation processes are ...

  • Support Tim created an article,

    What is the maximum size material that can be carved (length, width, thickness)?

    By utilizing Tile Toolpaths in the Vcarve design software it becomes possible to achieve an infinite length for a project along the Y-axis. This process is referred to as "Tiling". The accompanying...