2HP Water Cooled Spindle Kit for HD5 Series

2HP Water Cooled Spindle Kit - Store link

Featuring auto start and stop and the ability to control motor speeds directly within the Vectric software Requires 10.5 or higher)

This spindle is ultra-quiet, made with long-life German-made precision bearings, and designed for harsh environment operations. Operates on standard 110V AC and will plug directly into any standard wall socket (requires 15 amp circuit). Kit includes everything needed to work on SHARK CNC HD500 - HD510 - and HD520 models.

• 2hp (1.5Kw) liquid-cooled brushless Spindle.
• 8,000 - 24,000 RPM max 110V 13 amp inverter with digital readout display
• Digital interface cable to allow full auto control
• 3-1/2 gallon coolant system with dust-resistant screw-on lid and wire grommet
• ER11 Collet system includes 1/4″ and 1/8″ shank collets
• 13mm & 17mm wrenches
• Coolant hoses and fittings
• Coolant flow meter to ensure water movement
• Submersible 110V fluid pump for coolant.
• Aluminum Clamping kit for Spindle to CNC Shark HD5 series ONLY
• Pre-programmed VFD – ready to run

Download the 2HP Water Cooled Spindle Kit Manual HERE.

What is needed?

Software: 

• Vcarve/Aspire 10.5 or higher

Hardware:

• Out-of-the-box compatible with HD500, HD510, and HD520 Shark CNC machines. 
• Older Shark CNC machines will need to upgrade to the HD Controller and Pendant Kit and should purchase 2HP Water Cooled Spindle for HD4 and prior.

Parts List:

Description	Item ID#
2HP Water Cooled Spindle motor (1.5kw)	208101
2HP Inverter (1.5kw)      - VFD to WC Spindle cable      - Spindle Power Cable	208110      - 208155      - 208811
75W/110V Water Pump     - Replacement coolant hoses	208102      - 20379
1/4" ER11 Collet 1/8" ER11 Collet ER11 - 13mm Wrench ER11 - 17mm Wrench	Parts not sold separately by Next Wave CNC.